| 1.Identification of the product and of the company |
| Product Name |
Mirror-coated paper Label |
| Manufacturer's Product Code |
0134-4601 |
| Manufacturer/supplier |
Lecco (Kai ping) Adhesive Products Co., Ltd. |
| Telephone Number |
(86) 750 2829618 |
| Emergency Telephone Number |
(86) 750 2829628 |
| 2.Composition / Information on Ingredients |
| Chemical Characterization |
Mixture |
| Physical Form |
Solid |
| Color |
White / White |
| Product Use |
Printing, labeling and packaging |
| Ingredients |
|
| Chemical Name |
Content(%) |
CAS NO. |
| Wood pulp (Cellulose fiber) |
56-59% |
65996-91-4 |
| Water |
2-3% |
7732-18-5 |
| Calcium Carbonate |
13-14 % |
1317-65-3 |
| Kaolin |
16-18% |
471-34-1 |
| Other additives |
¡Ü1% |
/ |
| Acrylate copolymer |
15-22% |
26794-25-2(½ö¹©²Î¿¼) |
| 3.Hazards Identification |
| Overall Hazard Classification |
Not hazardous |
| Route of Exposure |
Skin contact and accidental ingestion |
| Possible Health Effects |
|
| Acute |
Eyes |
Direct contact may cause temporary eye irritation |
| |
Skin |
No significant effects expected from a single short-term exposure |
| |
Inhalation |
No significant effects expected from a single short-term exposure |
| |
Ingestion |
Gastrointestinal, throat irritation and nausea may occur if swallowed. |
| Chronic |
Skin |
Prolonged skin contact may cause irritation |
| |
Inhalation |
No volatile No Known applicable information |
| |
Ingestion |
Repeated ingestion or swallowing large amount may injure internally. |
| 4.Emergency and first aid measures |
| Eyes contact |
Immediately flush with clear water. |
| Skin contact |
Safety, No first aid should be needed |
| Inhalation |
No volatile, No first aid should be needed. |
| Ingestion |
If swallowed large amount, get medical attention immediately if ill effects occur. |
| Note to physicians |
This material is not-toxic; a small quantity is un-likely to cause harm. |
| 5.Fire fighting measures |
| Flammability |
Combustible |
| Flash point |
Not applicable |
| Auto-ignition Point |
Not determined. |
| Lower Flammability limit |
Not applicable |
| Upper Flammability limit |
Not applicable |
| Hazardous Properties |
None |
| Extinguishing media |
Use CO2, dry chemical, foam or water spray |
| Special Fire Fighting Procedures and Equipment |
Not applicable |
| Hazardous Combustion Products |
Not determined |
| Unsuitable Extinguishing |
None established |
| 6.Accidental Release Measures |
| Personal Precautions |
Avoid eye contact. Do not take internally |
| Environmental Precautions |
Prevent from spreading or entering into drains, ditches or rivers by using sand, earth or other appropriate barriers. |
| Methods for Cleaning |
Clean up spilled material and place in suitable containers for recycle or disposal.
Laws and local regulations may apply to releases, recycle and disposal of this material, as well as those materials and items employed in the cleanup of releases and disposal. You will need to determine which laws and regulations are applicable. |
| 7.Handling and Storage |
| Handing Precautions |
Use with adequate ventilation. Avoid eye contact. Do not take internally. Exercise good industrial hygiene practice. Wash after handing, before eating, drinking or smoking. |
| Storage Conditions |
Well ventilated, in dry and cool place, take away from sunshine, high temperature, fire and wet place. Store in room temperature 23¡æ¡À2¡æ humidity 60% ¡À 5% ¡£ |
| 8.Exposure Controls / Personal Protection |
| Engineering Controls |
|
| Local Ventilation |
None should be needed |
| Ventilation equipment |
Recommended. |
| Personal Protective Equipment for Routine Handling |
|
| Respiratory Protection |
No respiratory protection is required under normal usage |
| Hand Protection |
No special protection needed. |
| Eye Protection |
Use safety glasses or goggles if necessary |
| Skin Protection |
Wear working clothes. Washing at end of shift is adequate. |
| Hygiene Measure |
Exercise good industrial hygiene practice. Wash after handing, before eating, drinking or smoking. |
| 9.Physical and Chemical Properties |
| Physical Form |
Solid |
| Color |
White/White |
| Basic Weight |
190 g/m2 |
| Thickness (Total Caliper) |
205 um |
| Odor |
Odorless |
| pH |
Not determined |
| Solubility in Water |
Insoluble |
| Boiling Point |
Not applicable |
| Melting Point |
Not determined |
| Flash Point |
Not determined |
| Auto-ignition Temperature |
Not determined |
| Explosive Properties |
Not applicable |
| Oxidizing Properties |
Not applicable |
| Specific Gravity |
1.05 |
| Molecular Weight |
Not determined |
| 10.Stability And Reactivity |
| Stability |
Stable |
| Conditions to avoid |
Avoid high temperature and keep away from fire |
| Material to avoid (Incomparability) |
Not determined |
| Hazardous Decomposition |
No decomposition |
| Hazardous Polymerization |
Hazardous polymerization will not occur. |
| 11.Toxicological Information |
| Possible Health Effects |
None Known |
| Acute Toxicity |
None Known |
| Mutagenic Effects |
None Known |
| Reproductive Effects |
None Known |
| Other Toxicity Effects |
No information available |
| 12.Ecological Information |
| Environmental Effects |
No adverse effects on aquatic organisms |
| 13.Disposal Considerations |
| Waste Disposal Method |
Place in suitable containers for recycle or disposal in accordance with local laws and regulations. |
| 14.Transport Information |
| Not classified as hazardous for transport. |
| 15.Regulatory Information |
| Not classified as hazardous. Please follow all regulations in your country. |
| 16.Other Information |
| Prepared by |
LECCO (KAIPING) ADHESIVE PRODUCTS CO., LTD. |
| Contact |
Technical Services Engineering (86 750) 2829618 |
| Last version date |
2018-04-04 |
| Version |
1 |
| Disclaimer£ºTo the best of our knowledge, the information contained in this MSDS is accurate or is obtained from sources believed to be accurate. No guarantee, no liability, expressed or implied, is assumed for the accuracy or completeness of the information contained herein. Buyer assumes liability in its use this material. |
