| Technical Parameters |
| Crystal clear lamination film |
|
| Face |
|
| Material |
matt film |
|
| Basis Weight |
16¡À1 |
g/m2 |
|
| Thickness |
20¡À1 |
¦Ì |
|
| Color |
Transparent |
|
| Transverse tensile
strength |
¡Ý60 |
N/2.5CM |
|
| The longitudinal
tensile strength |
¡Ý40 |
N/2.5CM |
|
| Backing |
|
| Material |
|
|
| Basis Weight |
|
g/m2 |
|
| Thickness |
|
¦Ì |
|
| Color |
|
|
| Transverse tensile
strength |
|
N/2.5CM |
|
| The longitudinal
tensile strength |
|
N/2.5CM |
|
| Adhesive |
|
| Glue Type |
Acrylic solution based |
|
| Coating Weight |
10¡«12 |
g/m2 |
|
| Thickness |
9-11 |
¦Ì |
|
| Physical Data |
|
| Peel adhesion/180¡ã |
¡Ý2.0 |
N/2.5CM |
|
| Initial tack |
¡Ý2.0 |
N/6.25cm2 |
|
| Release force |
¡Ü2.0 |
N/2.5CM |
|
| Holding Power |
¡Ý24h |
h/2.5CM |
|
| Service Temp |
-10 ¡«60 |
¡æ |
|
| Min. application temp. |
10 |
¡æ |
|
| Max. application
temp. |
50 |
¡æ |
|
| Product Width |
|
| 975mm (Other specifications can be sliced.) |
|
| Product length |
|
| 200m,400m |
|
|
| Product Data£ºSP110 |
| Last Modified£º28/4/2019 |
Applications£º
It is used as a protective film on printed label paper; it is used in labeling fields such as paper, PET, and PP synthetic paper. |
Peculiarity£º
Waterproof and oil proof; it can enhance the protection and increase the smoothness of the surface of the printed trademark; it is cold and can be directly covered on the surface of the printed trademark without heating. |
Shelf life & storage£º
Normal temperature a cool, ventilated, avoid sunlight, temperature 25¡À3 ¡æ, relative humidity in the 50¡À5%, with good sealing and moistureproof ability of packaging, storage life can be up to 12 months. |
Other£º
|
Warranty£º
The information given is based on our knowledge and experience; and is given in good faith. It does not represent a guarantee or legal warranty for specific properties of for suitability for a specific use. The products are used in conditions beyond our control; we cannot assume any liability for damage caused through their use. It is highly recommended to take certain test prior to use of this product(s), to ensure it meets the requirement and/or suitability for use under end-use conditions. We reserve the right for the technical innovation of the product(s). |
|
